How to Care for and Store Your Valaverse Figures and Accessories

Quick answer

Keep Valaverse figures and accessories out of direct sunlight, dust them with a soft brush instead of water, and store small parts in labeled compartments rather than loose bags. Handle figures by the torso, not the limbs, and rotate or rest joints instead of forcing them. A five-minute routine every few months prevents most paint rub, dust buildup, and lost accessories.

Valaverse figures are built for adult collectors, not for play, and that changes how you should treat them. Paint apps, interchangeable hands, and small accessories like the Backpack Set Alpha all hold up well when you handle them deliberately and keep them away from heat, sun, and clutter.

This guide walks through a simple care and storage routine you can repeat every few months. Each step includes the mistake that causes the most damage, so you can avoid the common traps that shorten the life of a display collection.

Set up a clean, dry handling space first

Before you touch a figure, clear a flat surface and wash your hands. Oils and grit from your fingers transfer to paint and joint seams, and a cluttered desk is how small parts disappear. A light-colored towel or mat helps you spot tiny accessories that roll.

Keep food and drinks away from the workspace. A spilled drink can ruin a figure faster than years of display, and crumbs attract pests that chew soft plastic. If you have pets or young children, work in a room you can close off and always account for every accessory before you stand up.

• Mistake to avoid: handling figures right after lotion, sunscreen, or cooking oil, which can stain matte finishes.

Dust with a soft brush, not water

Most dust comes off with a soft makeup brush or a clean paintbrush. Work from the head down, brushing seams and crevices gently so you do not push debris deeper into joints. For stubborn dust in backpack straps or pouches, a short blast of canned air held well away from the figure works, but keep the can upright to avoid propellant spray.

Avoid water and household cleaners. Water can seep into joints and promote corrosion on metal pins, while alcohol and ammonia-based cleaners can dull or lift paint. If a figure has a sticky residue, start with a dry brush and only escalate to a barely damp cloth if the manufacturer's guidance allows it.

• Checkpoint: if the brush leaves lint, switch to a finer synthetic brush before continuing.

Pose and swap parts with controlled pressure

Warm a stiff joint slightly with your hands before moving it, and support the figure at the torso and the joint you are adjusting. Twisting a limb while holding only the hand or foot puts stress on the peg. Interchangeable hands and heads should seat fully with light pressure, never a hard shove.

When you swap accessories, set the unused pieces in a tray instead of on the table edge. For figures like Jester, which ships with multiple accessories and interchangeable hands, keeping the spares organized during a pose change prevents the most common loss scenario. If a joint feels locked, stop and check for a misaligned peg rather than forcing it.

• Mistake to avoid: using pliers or tools on joints, which can crack plastic or strip paint.

Store accessories by set, not by type

Loose accessories in one big bin cause scratches and make it hard to confirm a set is complete. Store each set together in a small zip bag or compartment box, and label it with the figure or set name. Backpack sets are a good example: keeping the five styles from Backpack Set Bravo together means you always know what you have.

For long-term storage, use acid-free bags or lined boxes and keep them in a cool, dark place. Clear plastic bins are fine for display shelves but can let light through, so opaque containers are better for anything stored for months. Add a silica packet in humid climates, but do not let it touch painted surfaces directly.

• Checkpoint: photograph each stored set before sealing the box so you have a record for insurance or resale.

Control light, heat, and humidity on display

Ultraviolet light fades paint and yellows plastic, so keep shelves out of direct sun and away from windows. Heat from radiators, space heaters, and even some display lighting can soften plastic and cause joints to sag or warp over time. Aim for a stable room temperature and moderate humidity.

If you use detolf-style cabinets or open shelving, rotate figures periodically so no single side faces a light source for years. Figures displayed near a window or under a hot lamp are the ones most likely to show color shift first. A simple rotation schedule spreads light exposure evenly across the collection.

• Mistake to avoid: storing figures in an attic, garage, or shed where temperature swings are extreme.

Handle mail-away and limited items with extra care

Mail-away figures and limited variants often carry more value and sometimes more delicate paint work. Handle these with clean hands, keep the original packaging and order confirmation, and store the figure separately from everyday display pieces. If you plan to resell later, completeness matters as much as condition.

For items like Pandora Mail Away, which requires mailing in 20 original Action Points, keep your order confirmation and any related paperwork in the same storage box as the figure. That documentation is part of the item's history and helps if you ever need to verify authenticity or complete a sale.

• Checkpoint: store limited figures in a dust-free container with the accessories bagged separately.

Your five-step Valaverse care routine

1. 1. Prepare a clean handling station: Clear a flat surface, wash and dry your hands, and lay out a light-colored mat so small accessories are visible if they drop. Checkpoint: no food, drinks, or pets in the work area before you open a figure.
2. 2. Dust with a soft brush: Brush from head to toe with a soft makeup or paintbrush, working dust out of seams rather than pushing it in. Use canned air only if held well away and upright. Mistake to avoid: water or alcohol cleaners, which can corrode joints or lift paint.
3. 3. Pose with supported pressure: Warm stiff joints in your hands, hold the torso and the joint being moved, and seat hands and heads with light pressure only. If a joint will not move easily, stop and check alignment instead of forcing it.
4. 4. Store accessories by set: Bag or compartmentalize each set separately, label it, and keep the five packs in a set like Backpack Set Bravo together with a note of what is included. Checkpoint: photograph the stored set before sealing the container.
5. 5. Display away from light and heat: Keep shelves out of direct sun and away from heaters or hot lamps, and rotate figures periodically so light exposure is even. Next step: schedule a five-minute dust and inspection every three months.

Product facts that affect care and storage

• Backpack Set Bravo: 1/12 scale backpack accessory set in black with five different backpack styles included; fits all Action Force figures; intended for adult collectors only. Five small packs in one set are easy to lose, so store them together and check all five are present before putting the set away.
• Backpack Set Charlie: 1/12 scale backpack accessory set in tan with five different backpack styles included; fits all Action Force figures; intended for adult collectors only. The tan colorway shows dust and handling marks more than darker sets, so a soft brush cleaning is worth doing more often.
• Pandora Mail Away - ACTION POINTS REQUIRED: Requires 20 Action Points mailed to Valaverse; includes multiple accessories, interchangeable head and hands, swappable ponytails, and a display stand; chance for a 1 of 500 bloody variant. Keep the order confirmation and Action Points documentation with the figure, because the mail-away process and variant chance make paperwork part of the item's record.
• Praetorian Wraith 2.0 Mail Away - NO POINTS OPTION: 1/12 scale action figure that does not require Action Points to be mailed in; includes multiple accessories, interchangeable hands, and a display stand; intended for adult collectors only. Because no points need to be mailed, there is less paperwork to track, but the interchangeable hands still need a labeled storage spot to avoid loss.

A consistent, gentle routine does more for your Valaverse collection than any single product. Brush dust instead of washing, support joints when posing, store accessories by set, and keep display areas cool and dark. Do that, and your figures and backpack sets will look the same in five years as they do today.